Purpose:
Most people need a way to keep up with "stuff" in such a way that they could prove to the insurance company what they had if it were destroyed. This tool provides a way to do that and keep 1 or 2 pictures of each item(s)you're keeping up with. Finally, you may want to share and synchronize the data with someone else, e.g., your spouse.
That's what this workshop is for. The data will be encrypted using your own personal password. Other than that, it will be stored just like any other ITSBITS® Catapult Garage configuration file in the garage.
While no one can fully guarantee the security of your data, the fact that it needs your ID/password to decrypt the data certainly helps.
Start the Tool
When you select the "Personal Inventory" tool the workshop will be displayed. You'll immediately note that only the login fields are enabled. Menu options are not enabled and no data is displayed at all. You'll also notice that there's a timer below the login-area showing how long (in seconds) this form will remain up before it disappears. There will be a notice reminding you about this time limit further below the login area.
First Time Tool Is Used
The first time into the tool, you should enter an ID/password combination you'll be able to remember and happy to use to secure your information. NOTE: use an 8-character password and include alpha (A-Z, a-z), numeric (0-9) and exclamation point (!) characters. (Example, "Nellie" could become "Nell1e1!" to build a secure password. The system will try to find a configuration file appropriate for your ID/password combo, but it won't yet exist, so you'll see an error message. Notice that the last thing the message says is that if this is the first time you've run the workshop, you should simply ignore the message. Click on the "OK" button to continue.
Add A Record
Once you do this, the workshop will go to an "ADD MODE OPERATION" screen with the toolstrip and menu items enabled and a setup for data entry that looks something like the one shown below:
 |
On this toolstrip, the red-plus icon is for "ADD" the Arrow-icon is for "Change" and the Skull/crossed-bones is for delete. The diskette is for save and the green door is the way out, or "Exit." Hover over any of these and you will be told what it's for. |
Data fields
As you look at the ADD-MODE screen, you'll see the components that make up an entity's record.
Once you have entered the data for an item, just click the "OK" button, to make the actual addition. Notice that only the Inventoried Item field is required. You could leave all the rest blank, though why you would do that is unknown. You can also stop an addition in mid-stream by clicking the Cancel or "STOP" button should you desire to do so.
Once you've clicked the OK button, you'll see the item added in the list of "Known Entities."
Anytime you add an entity, you'll go through the same procedure. The only difference will be that you can click the red "plus" icon or use the menu item for UPDATE>>ADD to initiate the activity.
Change/Delete Records
In a similar manner, you can click on the Green-arrow icon or use the menu option for "UPDATE--CHANGE" to initiate a change activity. If you don't have an item highlighted in the list when you do this, you'll need to double-click on an item in the list of known entities so that it comes up. You can change any field in an entity's record as needed.
And, finally, you can click on the "skull-and-crossed-bones" icon or use the menu option for "UPDATE--DELETE" to initiate a delete activity. If you don't have an item highlighted in the list when you do this, you'll need to double-click on an item in the list of known entities so that it comes up. CAUTION: Once an item is deleted, it is deleted. You can restore the configuration and get it back, but that's all you can do. That might mean other changes--those made since the configuration was backed up--are lost.
Now, you've seen most of what this tool actually offers. If you go out and look at the file on disk, you'll find your data is encrypted. Your password is required to decrypt it. You also have an "EXIT" button that will close the tool. Additionally, you'll find there a timer for the item-details-group of information. Whenever that time expires, the entity's detail-view will disappear. There's also a timer for the entire form--it's used to close the form after a given time. For security reasons, if you're in a place where other people might access your computer, you'll want to keep these times short and be sure to try to remember to use the EXIT button if you leave the computer.
Configuration Menu
You'll find on the configuration menu that you have an option to set both the delay times just mentioned. If you work where there's no worry about other people accessing your computer, you can always set these two timers at some very large value--say 99999. If you don't work in a place where your computer is truly private, we recommend that you use this trick only after thinking about its security implications for your data.
Now we come to a special feature for the tool. Due to the nature of the data involved, you may want to share it with someone else, e.g., your spouse. You may also want to make a backup of your configuration data on a different computer so that if your hard drive dies you know you'll have the up-to-date file. For this to be effective, that means you must also share your item pictures and back them up. But, that takes up disk space you may not want to use...so you have the option of setting it up as you want it to work. It's all on this menu.
To do these, click on the CONFIGURATION menu. There you'll see the option for an optional Backup Path and for an optional Share Path. Clicking on either of these will bring out a box asking you for the file path to be used. It's a standard box with a browse button to help you find the path you want.
If you are specifying a Share Path, you'll then be asked--just to be sure--which configuration file to use--the normal one (on your hard drive) or the shared one. If you are actually sharing the data with someone else, be sure to select the option to use the shared configuration path. (Just as a sideline note, the normal backup option is not changed--it still backs up your configuration file(s) on your own hard drive.) When you're setting up such a share with someone, have the share path on each computer point to the other computer: this will keep the 2 machines' data files synchronized for you. (Notice, both computers will have to have permissions applied in the operating system so that sharing can take place.)
Now, if you're sharing and/or backing up your data, be sure to click and check the appropriate "copy pictures to..." menu item(s).
Picture Viewing
There's one last little trick you should know about in the tool. You'll see each item's images in the picture boxes at the far right of the form. Often you'd like to see them "enlarged." To do that, just click the picture. After you view it, click it again to continue normally.
Find Item
While you have only 1 or 2 items cataloged, finding them is easy. Once you get a much larger number of items cataloged, you'll have problems finding the one you want. In the "Known Entities" box, you can enter somethng you're looking for, then click the eye-glasses button at right to find what you're looking for. For example, if you had a "diamond ring" in inventory, you could enter the word "ring" and click the button to find what you want.
When you find the item in question, the display box will also show a down-arrow button you can use to search for the next item that meets your search criterion.
Insurance Notes
If you're taking time to make a personal inventory for insurance purposes, chances are you're looking to homeowners or business insurance for replacement money should the worst happen. Here's something you have to know about. If you don't purchase a rider for your policy that does "100 percent replacement cost" the insurance company will want to depreciate everything you had. Put that another way. The insurance company will want to pay you a depreciated amount for every item you had. Hence, a 3-year old big-screen TV that originally cost you $2,000 may have a replacement cost of only $1,000...good luck with that. The real trick is to insist upon a 100% replacement rider for your policy. Some agents and companies don't like to talk about this because the riders cost very litle and have the potential to cost them lots of money. Insist on it. If they won't talk about it, talk to a different company. You want it.
The other thing we can't say often enough is that making the inventory is a good start, but you must keep a copy of it in a remote location. If you plan on using it to recoup when youre home is destroyed it won't do much good if the entire record goes away with the house. Make a CD or DVD and keep it as far away from your home as possible...then hope you don't ever need a copy in the first place.
ITSBITS® is registered in the U.S. Patent and Trademark Office as the property of IHS, Incorporated. ITSBITS® Catapult Garage, all tools, workshops, related software, and documentation, regardless of medium, is ©2007 by IHS, Incorporated...all rights under all applicable copyright laws reserved by IHS, Incorporated.